|How to hang art|
|Artist Ed is working on a ceramic plate to be hung on the wall|
My Tips How to Hang Clay Wall Art
|I add a built-in hanger to my wall art|
Obviously you cannot hang a gigantic clay piece weighing hundreds of pounds on the wall without considerable amount of planning, design and special construction.
The art pieces I will discuss hanging on the wall in this article are ones you can hold in your hand. These are not too heavy that would cause problems for the sheetrock walls.
|Ed's favorite ceramic cat|
The ideal ceramic art you wish to hang should not be more than forty pounds. If you are attempting to hang more than forty pounds then most likely you will need to do special planning, design and construction to get your wall art mounted. This article is not for you.
This article is written for the majority of folks who are homeowners who purchased ceramic art that is less than forty pounds and can be held in one hand without straining. I am not talking about homeowners who have Hercules arms.
By the way, all my art work comes prewired and ready to hang as mentioned above. Hercules is not needed to help get it on your wall.
Handmade Clay Wall Hanging Rules
|Handmade ceramic fish art wall decor|
A twelve inch by twelve inch square of drywall typically can hold forty pounds of weight.
Now if you can find a stud behind the drywall then you could hang more weight. As always, finding a stud and getting into the support structure of the wall is the best. However, this is not always the case especially when hanging more than one clay art piece in a gallery configuration.
When hanging art on a wall it subject to the pull of gravity pulling the piece down and the weight of the piece. There are also forces pulling the piece outward from the wall.
To be safe, a general rule of thumb whatever wall anchors you use, use one fourth of their stated weight.
This way you can always be sure you are not overloading your wall anchor. So for example, if my wall anchor is rated for forty pounds I would hang at a maximum a ten pound clay art decor. The larger the wall anchor generally the more secure and more weight it can hold.
Ceramic Art Wall Hanging Anchors Types
My recommendation and what I use ninety nine percent of the time is a simple picture hanger.
However, I make sure not to use just any picture hanger. I always buy a new hanger and one that is weight rated. It has on the package how much weigh it can hold. And then as mentioned before I only use one fourth of the rated weight on the package.
The best picture hangers I have found are the OOK Picture Hangers. They are used in galleries, museums and homes worldwide.
If they are used in museums then they are good enough for me. I have been using OOK to hang my clay art for decades with no failures. You can find them at most hardware stores or online.
If you purchase my ceramic art it comes prewired and with an OOK picture hanger rated for the weight. You will be able to hang your artwork like a true professional.
Why OOK? Here is why. Sure I can find picture hangers for cheap but there is a reason. Most picture hangers are made of very low quality steel. The steel is low grade and will bend over time. I have clay art that has been hanging for years on OOK hangers with no bends. OOK wall hangers are at least twenty percent stronger than regular hangers. They are designed and bent in such a way as to be stronger and last longer. Even their nails use better quality steel to resist sagging over time.
Number one tip NOT to do. You must avoid the temptation if you have a heavy clay artwork to hang to use multiple anchors to secure to the wall. Do not do this. If you have two picture hangers rated at twenty pounds by using them two of them you still only have twenty pounds not forty.
Another great hanger to use without needing any tools is the OOK Hercules thin wire hook. Just push into the wall and hang your artwork. It’s very convenient and eliminates the need for a hammer or nails.
This system works well.
Clay Art Wall Hanging How Tos
What do you do if you purchased art with no hangers built in? In this case you are going to have to build a way to hang your newly purchased art. However, as mentioned before if you purchased my art you will have no worries. All my ceramic art comes pre-wired with a hanger. It’s ready to mount. This comes in real handy for example if you are planning to hang a gallery. A good place to hang a gallery is in the bathroom.
A gallery of different sized fish hanging on the wall works well.
Building a mounting system is not that hard if you know what materials to buy. Many folks choose to mount their artwork to lumber. Wood is a great way to mount art because it comes in many different sizes and of course you can cut it to fit your exact length. You can also paint it to match any color.
|Ceramic art is mounted to wood for hanging|
What never to do when hanging art
I always use wire and never use string or fishing line. And here is why. I guarantee over time string and fishing line will breakdown and break. It may take a year or so but it will. Even twenty pound fishing line will break.
Fishing line is not resistant to sun and light. Over time the line will become brittle and could break. To test, take some and lay it out in the sun.
After a month or some period of time you will see that it has become brittle and could break. Ask any professional bass fisherman how often do they change their line and why. Is this what you want holding your ceramic art to the wall?
The best wire to use is at least six strand galvanized hobby wire. You can get it in anywhere from twenty gauge to nine gauge. If you want to know what the best just ask a museum. They will tell you they use at least fifty pound framer wire. This is usually a stainless steel wire wrapped in a plastic coating. The coating protects your hands and also helps reinforce the wire.
The concept is the same as with the hooks. If you buy cheap steel you get cheap steel. If in doubt buy OOK. Sorry if this sounds like an OOK commercial but their products are what I use and have had no problems.
My secret of mounting clay to wood
Most everyone’s first thought is to run down to the local hardware store and purchase Liquid Nails for projects. And you will be right for a while until it fails. It might be a while but it will fail.
I have found it just does not bond well to ceramic over time. I have no idea why but it fails, at least for me. It’s a great product and I use it all the time for projects just not my clay artwork. It’s great for molding and paneling. It has low order and is non-staining. But for some reason it does not hold well over a longer period of time to ceramic.
|Large ceramic wall art mounted on wood and hung on the wall|
But honestly the best solution is not to use anything thing at all. Look for hanging artwork decor with built-in loop holes.
The best option is ceramic decor in which the artist has pre-formed loops and or other hooks in the back of their artwork. This way the loops are fired into the piece and are very strong. This is the technique that I use in most if not all of my artwork. All that is needed is to use wire to form a loop to hang the clay art on the wall.
Ceramic FAQ articles you don't want to miss out on
Hanging Ceramic Art Conclusions
I hope this article was of value to you. I know there are hundreds of special and unique situations in which art can be hung on the wall. I tried to cover the most important and most common aspects of hanging clay art.
In short, don’t skimp on cheap hangers and wire. Always look for art where the artist has built-in loops in the back of their artwork. This makes mounting so much easier.
But if you are stuck and are forced to use glue be sure to check out Loctite PL Premium 3X. There may be other brands that work just as well but this is the brand that I have had great success with. Happy hanging!